Procoat Spraying Enamel
For a hard-wearing finish on steel, galvanised iron and other metals.
Procoat Spraying Enamel is a fast drying machine enamel designed for interior and exterior applications, where a hard-wearing finish is required.
Available at Aalto Stores and Stockists
For a hard-wearing finish on steel, galvanised iron and other metals.
Procoat Spraying Enamel is a fast drying machine enamel designed for interior and exterior applications, where a hard-wearing finish is required.
Available at Aalto Stores and Stockists
For a hard-wearing finish on steel, galvanised iron and other metals.
Procoat Spraying Enamel is a fast drying machine enamel designed for interior and exterior applications, where a hard-wearing finish is required.
Available at Aalto Stores and Stockists
Product Specification Solvent based
Sheen Level Gloss
Coverage 8-10m2 per litre per coat
-
Ensure surfaces are free from loose and flaking paint. Wash surfaces with a suitable cleaner prior to painting to remove any oil, grease, dirt or other contaminants. Where there are areas of mould, treat with a mould remover.
-
Brush
Roller
Spray -
Treat and remove any rust present.
Apply 1 coat of Procoat Etch Primer, allow 2 hours to dry.
Apply 1 or 2 coats of Procoat Spraying Enamel, allowing 6 hours between coats.
-
20L
-
White and tinted colours
-